Industries

Categories

Added Recently

Subcategories

Years

Manufacturers

Sales Representatives

Locations

1988 Schramm 450WS

STK#:604871000

Schramm T450 Water Well Rig and Pipe Truck Rig: 53784 Miles on Ford Truck Complete rebuild New drill head New head control chain New chain & chain gears Complete Radiator replaced New hydraulic valves New tires 5 x 8 Gardner Denver Mud pump - new rebuild 300/500 Air compressor, not mounted. Was taekn off to conserve fuel Casing hammer Table capacity up to 16" casing Has drilled to 1200' 1985 International Pipe Truck Flatbed Automatic 142464 actual miles Location: California

1991 Diedrich D120

STK#:397041000

John Deere 6 Cylinder Engine Rebuilt Approximately 7 years Ago Rebuilt Transmission February 21, 2017 500 Gallon Water Tank, Cat-head, Fluted Kelly, (2) Auger Racks Tool Boxes, (4) Out-riggers 3K, 7K, 10K, Winches Dual Mounted Swinging Auger Racks submitted; Rated from 200' to 350' Depth with Augers and 2000' with Core Drilling

Sonic SDC500-29P

STK#:397041001

80k Diedrich head 28' stroke, 37' 8" overall, 24k pullback 16k pull down 12k 5/8" x 222' nonrotating winch 4"-13" nominal clamping break out table Hydrostatic circuit 4500PSI, pilot control, micro feed, float, high/low feed, 120gal hydraulic tank Mounted on a 2004 Int'l 7600 6x4 Cummins ISM 320V upgraded ECM 385hp A45/1450 ft torque Hendrickson 38k rear axles 11R22.5 tires GMC bean pump 3L6 Moyno Head #A0012 Rebuilt 7/16/10, 9/30/12, 7/23/18 (upgraded roller bearings) Rebuilt Transmission 8/19/17 Rebuilt winch 8/23/17 Odometer 104,651miles 9,374Hours

Sonic SDC500-29P

STK#:397041003

80k Diedrich head 28' stroke, 37' 8" overall, 24k pullback 16k pull down 12k 5/8" x 222' non-rotating winch 4"-13" nominal clamping break out table Hydro-static circuit 4500PSI, pilot control, micro feed, float, high/low feed, 120 gallon hydraulic tank Mounted on a 04 Int'l 7600 6x4 Cummins ISM 320V upgraded ECM 385hp A45/1450 ft torque Eaton Fuller 13 speed transmission, Hendrickson 38k rear axles, 11R22.5 tires, GMC bean pump, 3L6 Moyno Head #A0001 Rebuilt 3/22/12, 11/17/16 (upgraded roller bearings) 9/11 complete engine overhaul (95k chassis) Completely rebuilt table (all new) 11/17/16 Rebuilt bean pump (FMC w1122BCD) 2/11/19 New main Hydraulic pumps 3/27/17 New cam rollers for head cradle 10/11/17 Odometer 16,188 miles 2,466 Hours 1

2010 Geoprobe 8140DT

STK#:397041004

CAT 4.4 Engine GV4 head (replaced 12/9/16) model 213692 serial 4026 Current head hours 48 hours Engine hours 4326 hours Well documented service documents Completely new wire harness (complete engine and rig) Turbo replaced 8/4/16 (4,100 Hours) 3L6 Moyno pump

Other Machines In Our Inventory